Use this search box to find articles that have run in our newspapers over the last several years.

E.L. DPW issues info. about lead in drinking water

Editor's Note: In addition to a flyer sent to all town residents, the East Longmeadow Department of Public Works has released the following information.



EAST LONGMEADOW What are the health effects of lead?

Lead is a common metal found throughout the environment in lead-based paint, air, soil, household dust, food, certain types of pottery porcelain and pewter, and water.

Lead can pose a significant risk to your health if too much of it enters your body. Lead builds up in the body over many years and can cause damage to the brain, red blood cells and kidneys. The greatest risk is to young children and pregnant women.

Amounts of lead that won't hurt adults can slow down normal mental and physical development of growing bodies. In addition, a child at play often comes into contact with sources of lead contamination like dirt and dust that rarely affect an adult.

It is important to wash children's hands and toys often, and to try to make sure they only put food in their mouths.



What steps can I take in my home to reduce exposure to lead in drinking water?



Despite our best efforts mentioned earlier to control water corrosivity and remove lead from the water supply, lead levels in some homes or buildings can be high. To find out whether you need to take action in your own home, have your drinking water tested to determine if it contains excessive concentrations of lead.

Testing the water is essential because you cannot see, taste, or smell lead in drinking water. Some local laboratories that can provide this service are listed at the end of this booklet. For more information on having your water tested, please call 525-5400 ext. 133.

If a water test indicates that the drinking water drawn from a tap in your home contains lead above 15 ppb, then you should take the following precautions:

1. FLUSH YOUR SYSTEM Let the water run from the tap before using it for drinking or cooking any time the water in a faucet has gone unused for more than six hours.

The longer water resides in your home's plumbing the more lead it may contain. Flushing the tap means running the cold water faucet until the water gets noticeably colder, usually about 15-30 seconds.

Homes with lead service lines to the water main may have to flush the water for a longer time, perhaps one minute. All known lead service lines in East Longmeadow have been replaced. If you are aware that your house has a lead service line to the water main, please contact us for more information.

Although toilet flushing or showering flushes water through a portion of your home's plumbing system, you still need to flush the water in each faucet before using it for drinking or cooking.

Flushing tap water is a simple and inexpensive measure you can take to protect your family's health. It usually uses less than one or two gallons of water and costs between 15 cents and 30 cents per month.

To conserve water, fill a couple of bottles for drinking water after flushing the tap, and whenever possible use the first flush water to wash the dishes or water the plants.

If you live in a high-rise building, letting the water flow before using it may not work to lessen your risk from lead. The plumbing systems have more, and sometimes larger pipes than smaller buildings. Ask your landlord for help in locating the source of the lead and for advice on reducing the lead level.

2. USE ONLY COLD WATER FOR COOKING AND DRINKING Try not to cook with, or drink water from the hot water tap. Hot water can dissolve more lead more quickly than cold water. If you need hot water, draw water from the cold tap and heat it on the stove.

3. REMOVE LOOSE LEAD SOLDER AND DEBRIS FROM PLUMBING MATERIALS Remove loose lead solder and debris from the plumbing materials installed in newly constructed homes, or homes in which the plumbing has recently been replaced, by removing the faucet strainers from all taps and running the water from three to five minutes.

Thereafter, periodically remove the strainers and flush out any debris that has accumulated over time.



4. IDENTIFY AND REPLACE LEAD SOLDER If your copper pipes are joined with lead solder that has been installed illegally since it was banned in 1986, notify the plumber who did the work and request that he or she replace the lead solder with lead-free solder. Lead solder looks dull gray, and when scratched with a key looks shiny. In addition, notify the Department of Environmental Protection about the violation.

A licensed plumber can be hired to check if your home's plumbing contains lead solder, lead pipes, or fittings that contain lead.

5. FIND OUT ABOUT YOUR SERVICE LINE The Town maintains records of the materials located in the distribution system and information about the service line that connects your dwelling to the water main.

If you have questions about your service line, please contact us for more information.

6. HAVE AN ELECTRICIAN CHECK YOUR WIRING If grounding wires from the electrical system are attached to your pipes, corrosion may be greater. Check with a licensed electrician or your local electrical code to determine if your wiring can be grounded elsewhere.

Do not attempt to change the wiring yourself because improper grounding can cause electrical shock and fire hazards.

The steps described above will reduce the lead concentrations in your drinking water. H

owever, if a water test indicates that the drinking water coming from your tap contains lead concentrations in excess of 15 parts per billion (ppb) after flushing, or after we have completed our actions to minimize lead levels, then you may want to take the following additional measures:

Purchase or lease a home treatment device. Home treatment devices are limited in that each unit treats only the water that flows from the faucet to which it is connected, and all of the devices require periodic maintenance and replacement.

Devices such as reverse osmosis systems or distillers can effectively remove lead from your drinking water. Some activated carbon filters may reduce lead levels at the tap; however all lead reduction claims should be investigated.

Be sure to check the actual performance of a specific home treatment device before and after installing the unit.

Purchase bottled water for drinking and cooking.



Who can I call for more information?



You can consult a variety of sources for additional information. Your family doctor or pediatrician can perform a blood test for lead and provide you with information about the health effects of lead.

Departments and local government agencies that can be contacted

Water providers can supply you with information about your community's water supply, and a list of local laboratories that have been certified by EPA for testing water quality: East Longmeadow Department of Public Works, 525-5400 ext. 133.

Local Departments of Code Enforcement can provide you with information about building permit records that should contain the names of plumbing contractors that plumbed your home: East Longmeadow Building Department, 525-5400 ext. 128.

Massachusetts Department of Public Health at 1-800-445-1255 or Local Health Departments can provide you with information about the health effects of lead and how you can have your child's blood tested: East Longmeadow Board of Health, 525-5400 ext. 123.



Who can I call to have my water tested for lead?



The following is a list of some Department approved laboratories in your area that you can call to have your water tested for lead.



Spectrum Analytical, 11 Almgren Drive, Agawam, 789-9018.

Con Test, Inc., 39 Spruce Street, East Longmeadow, 525-2332.

Severn Trent, 53 Southampton Road, Westfield, 572-4000.